To thoroughly clean an oven pane, it is worth removing the oven door in most cases. This not only allows you to reach the glass panes, but also makes cleaning particularly convenient. In addition, there is a reduced risk of damaging the oven pane – if it is removed individually, this risk is significantly higher. Most ovens have a similar system for removing the door.
This usually involves releasing safety catches so that the door can be lifted out via one or two resistors. Those who properly perform all the steps of removal and installation can benefit from a simple and deep cleaning. This method takes only a few minutes and offers little opportunity to go wrong.
To clean the oven pane, of course, one thing can not be missing – and that is the appropriate oven cleaner. There are a number of different products available for this purpose. Active foam, for example, spreads particularly well and has a short reaction time. For grease residues and stubborn stains, it is best to use a grease solvent. In each case, pay attention to the package size and a suitability for the materials of the oven surfaces.
This effective oven cleaner can be used throughout the interior of the oven and has a 10-minute strength formula, keeping the contact time short. It is a highly adhesive foam that spreads independently and quickly. Simply spray on the active cleaner, let it soak in, then wipe down.
For stubborn encrustations and grease residues, on the other hand, this grease cleaner comes in handy. The cleaner can be used on all oven surfaces and contains no harmful chemicals. As a result, it is biodegradable and does not spread any unpleasant odors.The liquid grease solvent comes ready to use in a spray bottle, which makes it extremely easy to use.
Instructions: Cleaning the oven window in 4 steps
- Oven spray
- possibly grease solvent or baking powder
- plastic cleaner
- lukewarm water
1. remove oven door
In order to clean the oven glass optimally, the first step should be to remove or unhinge the entire oven door. This not only makes cleaning easier, but also allows you to safely access the glass inside the door. Most models are very similar, so you can use the following procedure as a guide for removal:
Release the fuses. Open the oven door completely so that it sticks up at a 90° angle. Inside, you will find two fuses at the attachment point, which can be flipped over quite easily. Usually, you just need to put them forward in your direction.
Pay attention to resistances. After that, lift the door until you feel a first resistance. This must be overcome – then you will come to the second resistance. Hold the door on the left and right and pull it minimally in your direction. The door will now release from its anchoring by itself and can be removed.
Why not simply remove the panes? In principle, it would also be possible to remove only the panes – and not the entire oven door in the process. However, the counterweight of the panes would then be missing, so that the door would always close by itself. This means, for example, that you risk damaging the remaining panes and the door constantly closing by itself during cleaning.
2. remove the panes
After that, place the oven door on a soft surface to remove the panes. This will prevent scratching the frame or creating pressure points, which in turn could cause stress fractures. It is best to use a blanket on the floor. The disks are removed as follows:
Remove cover plate. Place the door on the blanket with the handle facing down and press the pushbuttons located in the upper area on the inside. If both buttons are pressed simultaneously, the cover panel can be removed. In some cases, you will find screws there instead, which must be unscrewed.
Removing the slices. After removing the cover strip, the first pane is free and can be pulled out of the two guides. Below it is the second disc, which can also be lifted out easily. Place the disks in such a way that you know later how around they have to be reinstalled.
3. cleaning the disks
Now the actual cleaning of the oven panes can begin. In addition to the usual cleaning agents – such as oven spray or grease solvent – you can also resort to home remedies. These include baking soda. Now clean both the panes and the cover plate:
Clean panes with active foam. Spray the active foam on the inside of the oven panes and cover the entire surface. Let the product soak in according to the manufacturer’s instructions and wipe with a soft sponge. Afterwards, the pane should be rinsed with lukewarm water. Repeat this step on the other side of the discs.
Clean the cover plate with plastic cleaner. For the cover plate, on the other hand, plastic cleaner is used. Grease splashes can also be treated here with a special grease solvent.
4. replace the oven door
Lastly, place the oven panes back in the door in the correct order. Be sure to note which side was previously up and which was down, and do not tilt the glass under any circumstances! It must rest properly in the holders. After the cover plate is clicked or screwed back in place, the door is inserted as before and the fuses are folded down.
Possible problems & solutions
Removal and Installation Problems. Problems with oven door installation and removal can be prevented by following the above steps properly. When in doubt, a look at the oven’s instruction manual can help if any ambiguity arises during the process.
Cleaning problems. Common cleaning problems, on the other hand, include stubborn stains and baked-on food. Check to see if your oven has a pyrolytic function and resort to stronger cleaning agents if necessary.