How To Reset Electric Lawn Mower

If you own an electric lawn mower, you may encounter situations where it stops working or malfunctions. Sometimes, the simplest solution is to reset the mower to its original settings. In this article, we will guide you through the step-by-step process of resetting an electric lawn mower.

Before attempting any troubleshooting, make sure to disconnect the mower from its power source. This will ensure your safety throughout the reset process. Additionally, consult the owner’s manual that came with your mower for specific instructions on resetting your particular model.

First, locate the control panel or display on your electric lawn mower. This panel usually contains buttons, switches, or a touch screen interface. Press and hold the power button to turn off the mower. If your mower has a cord, unplug it from the power source.

Next, wait for a few seconds before turning the mower back on. This brief pause will allow the mower’s internal system to reset and eliminate any electrical current that may still be present. After the short waiting period, plug the mower back into the power source or press the power button to turn it on.

If pressing the power button doesn’t result in the mower turning on, you may need to check for additional reset options. Some electric mowers have a reset button located on the control panel. This button is usually smaller and may be labelled “reset” or symbolized with an arrow pointing in a circular motion.

Press and hold the reset button for approximately 10 seconds and then release it. Wait for a few moments and then try turning the mower on again. This should reset the mower and resolve any software or electrical issues that were causing the malfunction.

If the reset process doesn’t fix the problem, consult your owner’s manual for other troubleshooting suggestions. In some cases, you may need to contact the manufacturer or a professional technician for further assistance.

In conclusion, resetting your electric lawn mower can often fix common issues and restore its normal functionality. By following the steps outlined in this article, you can confidently reset your electric lawn mower and continue to enjoy a well-maintained lawn.

Why Reset Electric Lawn Mower?

Resetting an electric lawn mower can often solve various issues that may occur during its operation. Here are some common reasons why you might need to reset an electric lawn mower:

1. Overheating Protection

Electric lawn mowers are equipped with safety features to protect the motor from overheating. If the mower has been running for an extended period or has encountered thick grass that demands more power, it may trigger the built-in thermal overload protection. Resetting the mower allows these safety features to reset and resume normal operation.

2. Electrical Malfunction

In some cases, an electrical malfunction can cause the electric lawn mower to stop working. By resetting the mower, you’re essentially restarting its electrical circuits, which can resolve minor malfunctions and glitches. This can be especially helpful if the mower suddenly stops without any apparent reason.

3. Battery Issues

If your electric lawn mower is battery-powered, resetting it can help resolve battery-related issues. Sometimes, the mower’s battery may not be providing enough power, causing the mower’s performance to be subpar or to stop altogether. Resetting the mower can help recalibrate the battery and ensure proper functioning.

4. Software Glitches

Modern electric lawn mowers often come with advanced electronics and software. Like any electronic device, these mowers may occasionally experience software glitches or hang-ups. Resetting the mower can help resolve these issues by clearing any temporary software disruptions or freeze-ups. It’s similar to restarting a computer or a smartphone to resolve software-related problems.

Overall, resetting an electric lawn mower can be a quick and easy troubleshooting step to solve minor issues. However, if the problem persists even after resetting, you may need to consult the manufacturer’s manual or contact customer support for further assistance.

See also  How To Adjust Handle On Husqvarna Lawn Mower

Step 1: Preparation

Before starting the process of resetting your electric lawn mower, make sure to take the following steps to ensure a safe and successful reset:

  1. Ensure that the mower is completely turned off and unplugged from any power source.
  2. Carefully inspect the blade and surrounding area for any signs of damage, wear, or debris that may interfere with the reset process.
  3. Check the power cord for any frays or damage. If there are any issues, it is important to repair or replace the cord before proceeding with the reset.
  4. If your electric lawn mower features a removable battery pack, remove it from the mower and inspect it for any damage or signs of corrosion. Clean the battery terminals if necessary.
  5. Before attempting to reset the mower, it is recommended to consult the owner’s manual for specific instructions and safety precautions provided by the manufacturer.

Important Safety Precautions:

  • Always wear protective gear such as gloves and safety glasses when working with your electric lawn mower to prevent injuries.
  • Keep children and pets away from the mower while performing the reset process.
  • Never attempt to reset the mower while it is still connected to a power source to avoid electric shock or other accidents.

Disconnect the power

Before attempting to reset your electric lawnmower, it is crucial to ensure your safety by disconnecting the power. Make sure the lawnmower is turned off and unplugged from the electrical outlet. This step is essential to prevent potential accidents or injury during the reset process.

If your electric lawnmower has a removable battery, it is also important to disconnect or remove the battery before proceeding. This will ensure that there is no power source connected to the lawnmower.

Once you have disconnected the power, you can proceed with the reset process to troubleshoot any issues or restore the lawnmower to its factory settings.

Remove the battery

Before attempting to reset your electric lawn mower, it is important to first remove the battery. This step ensures your safety and prevents any accidental electrical shock or injury.

To remove the battery, follow these steps:

Step 1:

Locate the battery compartment. The location may vary depending on the make and model of your electric lawn mower, but it is usually located either at the back or the side of the mower.

Step 2:

Carefully open the battery compartment. Some electric lawn mowers require a specific tool, such as a screwdriver, to open the compartment. Refer to your lawn mower’s manual for specific instructions.

Step 3:

Once the compartment is open, gently lift the battery out of its housing. Be sure to grip the battery securely and avoid any contact with the metal terminals to prevent any shocks.

With the battery removed, you can proceed with resetting your electric lawn mower. Make sure to store the battery in a safe and dry place until you are ready to re-install it.

Step 2: Troubleshooting

If your electric lawn mower is not working properly and needs a reset, there are a few troubleshooting steps you can try before proceeding to the reset.

1. Check the power source: Ensure that the electric lawn mower is properly connected to a power source. If it is connected to an extension cord, make sure the cord is in good condition and securely plugged in.

2. Inspect the blades: Examine the blades of the mower to see if there are any obstructions or debris preventing them from spinning freely. Remove any obstacles and clean the blades if necessary.

3. Check the circuit breaker: Locate the circuit breaker or fuse that controls the electric lawn mower and check if it has tripped or blown. If it has, reset or replace it accordingly.

4. Examine the safety features: Many electric lawn mowers have safety features such as a blade control switch or a handle that needs to be engaged for the mower to operate. Ensure that these features are properly engaged.

5. Test the motor: If none of the above steps resolve the issue, you may need to test the motor of the electric lawn mower. Refer to the owner’s manual for the specific instructions on how to do this.

as of February 19, 2024 4:43 am

If after troubleshooting the issue persists, you can proceed with the reset process for your electric lawn mower.

Note: Before performing any troubleshooting or reset procedure, always refer to the owner’s manual for specific instructions and safety guidelines.

Check the fuse

One of the first things to check if your electric lawn mower is not working is the fuse. The fuse is a safety device that protects the mower’s electrical system from overheating or overloading. When you push the power button or engage the switch, the energy flows through the fuse, and if the current exceeds the safe limit, the fuse will blow, cutting off the power to the motor.

Locating the fuse

To check the fuse, you need to locate it on your electric lawn mower. The fuse is usually found near the battery compartment or the control panel. Refer to your mower’s manual to find the specific location of the fuse.

Checking and replacing the fuse

Once you have located the fuse, inspect it to see if it is intact or blown. A blown fuse will have a broken wire or a darkened appearance. If the fuse is blown, you will need to replace it with a new one of the same rating. Consult your mower’s manual or contact the manufacturer to find the correct replacement fuse.

Tools and materials you will need:
Fuse (of the same rating)
1. Locate the fuse on your electric lawn mower.
2. Inspect the fuse to see if it is blown.
3. If the fuse is blown, replace it with a new one of the same rating.
4. Test the mower to see if the issue is resolved.

If the fuse was the cause of the issue, replacing it should solve the problem and get your electric lawn mower up and running again.

Inspect the power cord

One of the first things you should do when resetting an electric lawn mower is to inspect the power cord. Check for any visible damage such as cuts, frays, or exposed wires. Damaged cords can pose a safety hazard and should not be used.

If you notice any damage, it is important to replace the power cord before continuing. You can typically purchase a replacement cord from the manufacturer or at a local home improvement store.

Additionally, make sure the power cord is securely connected to both the lawn mower and the power outlet. Sometimes cords can become loose or unplugged accidentally.

In rare cases, the power cord may have internal damage that is not immediately visible. If you suspect this to be the case, it is best to consult a professional or contact the manufacturer for further assistance.

1. Plug the power cord correctly · Make sure the plug on the power cord is fully inserted into the mower’s power port.

· Double-check that the plug on the other end of the cord is securely connected to a functioning power outlet.

2. Reset the circuit breaker · Locate the circuit breaker on the lawn mower. It is usually located near the motor or control panel.

· If the circuit breaker has tripped, try resetting it by flipping the switch to the “off” position and then back to the “on” position.

· If it continues to trip, there may be a larger electrical issue that needs to be addressed. Consult a professional or contact the manufacturer for assistance.

Clean the motor

One of the common reasons why an electric lawn mower may not be working properly is due to a dirty motor. Over time, dust, dirt, and grass clippings can accumulate on the motor, causing it to overheat and malfunction. Cleaning the motor regularly can help prevent these issues and keep your lawn mower running smoothly.

Before you begin cleaning the motor, make sure the lawn mower is turned off and unplugged from the power source. This ensures your safety while working on the machine.

Materials you will need:

  • Clean cloth or soft brush
  • Canned air or a compressor
  • Gloves (optional, for added protection)

Here’s a step-by-step guide on how to clean the motor of your electric lawn mower:

  1. Start by removing any debris or grass clippings that are visible on the motor. Use a clean cloth or a soft brush to gently wipe away the dirt.
  2. Next, use the canned air or compressor to blow away any fine particles or hard-to-reach dirt that may be stuck in the crevices of the motor.
  3. If your lawn mower has a cover or housing that protects the motor, remove it carefully and clean both the inside and outside surfaces. Be sure to follow the manufacturer’s instructions for removing and reinstalling the cover.
  4. Inspect the motor for any signs of damage or wear. If you notice any loose wires, frayed insulation, or other issues, contact a professional for repairs.
  5. Once you have thoroughly cleaned the motor and checked for any problems, reassemble the cover or housing if applicable.

Remember, regular motor cleaning is essential to ensure the longevity and optimal performance of your electric lawn mower. By taking the time to clean the motor, you can prevent overheating and keep your lawn mower running efficiently for years to come.


What should I do if my electric lawn mower stops working?

If your electric lawn mower stops working, the first thing you should do is check the power supply. Make sure it is properly connected and that the circuit breaker or fuse hasn’t tripped. If the power supply is okay, you can try resetting the lawn mower by turning it off, unplugging it from the power source, waiting for a few minutes, and then plugging it back in. If this doesn’t solve the issue, you may need to consult the manufacturer’s manual or contact customer support for further assistance.

How do I reset the cutting height on my electric lawn mower?

The process of resetting the cutting height on an electric lawn mower varies depending on the specific model. In most cases, you can find the cutting height adjustment lever or dial on or near the wheels of the mower. Simply adjust the lever or dial to your desired cutting height. It’s important to refer to the manufacturer’s manual for your specific electric lawn mower model to ensure you are following the correct instructions for resetting the cutting height.

Can I reset the battery on my electric lawn mower?

Yes, you can reset the battery on your electric lawn mower. If you’re experiencing issues with the battery, such as it not holding a charge or not providing enough power to the mower, you can try resetting it by disconnecting it from the mower and allowing it to rest for a few minutes. After the rest period, reconnect the battery and see if the issue is resolved. If resetting the battery doesn’t fix the problem, it may be necessary to replace the battery or seek professional assistance.

Richard Taylor
Richard Taylor

Richard Taylor is a passionate gardener and horticulturist who has been growing and caring for plants for over a decade. He has a deep knowledge of the latest tools and products for gardening, and he provides informative and engaging evaluations of the latest products on the market. If you're looking for the best tools and products to help you care for your garden, Richard is your go-to source for expert recommendations.

My Buy